Fengrong Pressure Washers Recalled; Shock/Electrocution Risk

This alert was compiled from official government recall data published by the CPSC using automated analysis. All facts are sourced directly from official records. Last verified April 22, 2026.

A Shocking Recall: Your Pressure Washer Could Be Deadly

This isn’t just another product recall. This one involves a serious risk of electric shock or even death. If you purchased a Fengrong Tool pressure washer recently, pay close attention.

There's a recall for Fengrong Tool electric pressure washers because they lack a critical safety feature. Without a ground-fault circuit-interrupter (GFCI), these pressure washers can cause electrocution. It's a scary thought, but understanding the risk is the first step in protecting yourself and your family.

What Pressure Washers are Affected?

Knowing if your pressure washer is part of the recall is crucial. These recalled pressure washers were sold across the U.S., primarily online.

These are Fengrong Tool electric pressure washers. You may have bought one sold online at Amazon.com between October 2025 and January 2026. The units cost between $80 and $130. Look for a pressure washer that is orange or green with black accents. They stand about 25.5 inches high, are 12 inches wide, and 11 inches deep. These models had a touch screen feature and came with five nozzles. They also came in two-wheel or four-wheel configurations. "High pressure washer" is printed on the sides.

Why This Pressure Washer Recall is So Serious

Electricity and water are a dangerous combination. That's why this Fengrong Tool pressure washer recall is so important.

These pressure washers don't have a ground-fault circuit interrupter (GFCI). This essential safety device cuts off power in the event of an electrical fault. Without it, you could get a severe shock or even be electrocuted. This is a major safety flaw that poses a direct threat to U.S. consumers. It means the pressure washer doesn't meet basic safety standards. The agency confirmed that the missing GFCI is the primary reason for the recall.

What You Should Do Right Now

Time is of the essence with a recall like this. Here's what to do to protect yourself from potential harm.

1. Immediately stop using the recalled Fengrong Tool pressure washer, unplug it from the power outlet, and keep it away from areas where anyone might accidentally use it.
2. Destroy the pressure washer by cutting the unplugged power cord to render it unusable, ensuring that it cannot be accidentally plugged in again.
3. Take a clear photo of the destroyed power cord as proof of compliance with the recall instructions.
4. Send the photo of the destroyed power cord to Fengrong Tool by email at fengrongservice@163.com to initiate the refund process.
5. Await instructions from Fengrong Tool regarding the full refund, and once you receive confirmation, properly dispose of the destroyed pressure washer.

Getting Your Money Back

You're entitled to a full refund for this dangerous product. Here's how to get it.

Fengrong Tool is offering a full refund for the recalled pressure washers. You'll need to contact them to start the process. Email them at fengrongservice@163.com. Based on the official recall notice, they will ask for a photo of the destroyed power cord. This proves you've disabled the pressure washer. After you send the photo, they should process your refund. Remember, U.S. shoppers have rights when a product is recalled.

Frequently Asked Questions

Q: What is a GFCI and why is it important?

A GFCI, or ground-fault circuit interrupter, is a safety device that quickly cuts off power to prevent electric shock; its absence in these pressure washers creates a significant hazard.

Q: How do I know if my Fengrong Tool pressure washer is part of this product recall in the United States?

Check if you bought an orange or green Fengrong Tool electric pressure washer with a touch screen between October 2025 and January 2026, and look for the "High pressure washer" printing on the sides.

Q: I bought my pressure washer through Amazon; what are my next steps?

Regardless of where you purchased it, stop using it immediately, destroy the cord, photograph it, and email Fengrong Tool at fengrongservice@163.com to begin the refund process.

Q: What if I no longer have the receipt for my pressure washer?

Contact Fengrong Tool anyway; they are primarily concerned with removing the hazardous product from circulation and may not require a receipt for the refund.

Q: How long will it take to get my refund from Fengrong Tool?

The recall notice doesn’t specify a timeframe, so it is best to ask Fengrong Tool directly when you email them at fengrongservice@163.com.

This recall was announced by the U.S. Consumer Product Safety Commission (CPSC). For the official notice and complete details, visit www.cpsc.gov.